Home / Medical Division / Medi-Kool 1.5 - Drawer Unit

Right menu

MK15DR: Medi-Kool 1.5 - Drawer Unit

MK15DR

Welcome!  Here you will find the newest line to the Mermaid Medi-Kool (tm) product line.  The MK15DR unit was developed after numerous requests were made to our firm for a unit that can be utilized under a bench seat or lower compartment aboard any emergency response vehicle.  In this location the unit is out of the way yet fully functional for a quick access and great climate controlled storage!  Remember, each and every Mermaid Medi-Kool (tm) unit COOLS and HEATS within a one degree tolerance.

*** Looking for ONLY a refrigerator?  Visit your Medi-Kool unit of choice! ***

The MK15DR unit is manufactured out of high grade polished "mirrored" stainless steel for an attractive yet durable machine!   This product operates on either 12 or 24v and can also be upgraded to operate on 12/24v and/or 110/220v using the exclusive Danfoss Conversion Module.  This adds a nominal expense to the product, however, it creates the opportunity for the unit to run on any power supply provided on the vehicle with the added benefit of auto change-over!  This unit will automatically detect the 12 or 24v and will automatically detect the 12 or 24v and / or the 110 / 220v!  You have to do nothing!  Remember, disounts are applied for volume purchases.

As stated above, the standard unit will Cool AND Heat.  Should you require ONLY a refrigeration unit...Mermaid can supply that.  Contact us for pricin and any additional information or to order one today! - info@mmair.com.

MK15DR Base Price: $0.00

Select Product Options Below:


Medi-Kool 1.5 - Drawer Unit Specifications

Designed to change internal temperature 40-48 degrees off ambient. 

Unit Size: L - 20" (frontal view - side to side) x  W -  29" (front to back with attached compressor) x  H - 12."  - This INCLUDES the 1.5" mounting flange for the face of the unit.  The flange only affects the length (side to side) and height of the unit.  Depth is determined by compressor location of your choice.  Standard is attached to unit with 29" total depth.  Relocating the compressor removes 6.5" in depth.  Depth would then be 22.5"

Interior Size - L - 17.0" x W - 13.5" x H - 6.5"

NOTE:  Compressor is attached using 2 feet of copper tubing allowing for a remote mount installation.  Be careful in removing and relocating the compressor. Broken copper lines as a result of a compressor relocation are NOT warranted. 

Remote Compressor Size: L - 12.5" x  W - 6.5" x  H - 7.0" - Unit can be mounted up to two feet away from the case/body.  Be sure no "kinks" occur during the relocation process as well as ensure no stress points occur during the re-installation.  The copper lines need to still have some flex to ensure safe, damage resistant operation.

A minimum of 36 square inches of compressor ventilation is required for optimal performance of the unit. 

Download this product sheet as PDF