3.0 BPMG: Westerbeke 3.0 KW Generator
The Most Compact 3.0kW
The 3.0 BPMG nicknamed the "MVP3" not only has the smallest envelope available, but there is not another generator like it. The MVP3 was specifically designed for the small boat owner who previously didn't have available space to accommodate a generator with "punch."
Small, light, powerful...
"NOW AVAILABLE in 50 Hertz - Still 3.0 kW!"
** Don't forget to order your moisture cover offered on this model! It is a welcomed addition to the 3.0 unit in order to keep any water from landing on top of the generator. **
Lightweight & Powerful
Weighing in at only 165 pounds, the MVP3 weighs less per kW than one would expect. The MVP3 is powerful enough to run an air conditioner or water heater, etc.
Smooth & Quiet Operation
Operating with 2-cylinders instead of 1, at a low 2200-rpm instead of 3600, and with a specially designed flywheel: the MVP3 provides smooth performance and doesn't require a sound shield.
Simple Installation
The MVP3 is a simple "plug & play" genset with minimal wiring in the control box. An optional remote start/stop is available with harness to plug into the side of the control box.
Easy Operation
A simple "one-touch" rocker switch eliminates the need for separate start, stop and priming switch.
Clean Exhaust
The MVP3 incorporates a catalytic converter and meets all EPA and CARB requirements.
Electronic Governor
Maintains steady speed, provides optimum fuel efficiency and eliminates "bogging down" when load is applied.
Permanent Magnet Generator
A small, compact and completely sealed permanent magnet generator provides 5% voltage regulation, no-load to full-load, and produces a "utility grade" sine wave.
Standard Equipment
- Simple, "one-touch" start/stop control panel with running hour meter
- Electronic governing
- Overspeed protection
- Safety shut-downs - overspeed, low oil pressure, high exhaust temperature
- A.C. circuit breaker
- Battery Charger
- Water injected exhaust elbow
- Belt-driven, raw water pump
- Vibration mounts
- Lube oil drain hose
- Belt guards
- Operators' manual and parts list
- "CE" mark
- CARB certified
- EPA certified
- Meets U.S.C.G. regulation 33CFR-183
Optional Features
- Fresh water cooling (heat exchanger)
- Remote start-stop panel
- Ship-shore switch
- Hydro-hush muffler and fittings
- "A" on-board spare parts kit
- "B" extended cruising spare parts kit
- Anti-siphon valve for overboard cooling water discharge
- Technical manual